Skip to main content
admin@nationalskills.com.au
Phone 1300 417 006
Suite 245 4/16-18 Beenleigh-Redland Bay Rd
Loganholme QLD 4129
Australia

National Skills
  • Home
  • Courses
    • Construction
      • Short Courses
        • BSBESB402 - Establish legal and risk management requirements of new business ventures
        • CPCCCA3025 - Read and interpret plans, specifications and drawings for carpentry work
        • CPCCCM3003 - Work safely around electrical sources, services and assets
        • CPCCPD3033 - Apply intumescent coatings
        • CPCSIL3001 - Work with products and materials containing crystalline silica
      • Site Supervisor
        • QBCC Site Supervisor - Low Rise
        • QBCC Site Supervisor - Medium Rise
        • QBCC Site Supervisor - Open
        • QBCC Builder - Project Management Services
      • Certificate I and II
        • CPC10120 Certificate I in Construction
        • CPC20120 Certificate II in Construction
        • CPC20220 Certificate II in Construction Pathways
        • CPC20220 Certificate II in Construction Pathways (Remote Area Building)
      • Certificate III
        • CPC30220 Certificate III in Carpentry
        • CPC30320 Certificate III in Concreting
        • CPC31420 Certificate III in Construction Waterproofing
        • CPC33020 Certificate III in Bricklaying and Blocklaying
        • CPC30620 Certificate III in Painting and Decorating
        • CPC31020 Certificate III in Solid Plastering
        • CPC31120 Certificate III in Steelfixing
        • CPC30120 Certificate III in Shopfitting
        • CPC31220 Certificate III in Wall and Ceiling Lining
        • CPC31320 Certificate III in Wall and Floor Tiling
        • CPC32620 Certificate III in Roof Plumbing
        • CPC30820 Certificate III in Roof Tiling
      • Certificate IV
        • CPC40120 Certificate IV in Building and Construction (Building)
        • CPC40320 Certificate IV in Building Project Support (Contract Administrator)
        • CPC40320 Certificate IV in Building Project Support (Estimator)
      • Diploma / Advanced Diploma
        • CPC50220 Diploma of Building and Construction (Building)
        • CPC60220 Advanced Diploma of Building and Construction (Management)
        • CPC60121 Advanced Diploma of Building Surveying
    • Building Design
      • CPP40121 Certificate IV in Residential Drafting
      • CPP50921 Diploma of Building Design
      • CPP60421 Advanced Diploma of Building Design
    • Horticulture
      • AHC30921 Certificate III in Landscape Construction
    • Work Health & Safety
      • White Card
      • CPCCWHS1001 - Prepare to work safely in the construction industry
      • BSB41419 Certificate IV in Work Health and Safety
      • BSB51319 Diploma of Work Health and Safety
    • Business
      • BSBESB402 - Establish legal and risk management requirements of new business ventures
      • BSB30120 Certificate III in Business
        • BSB30120 Certificate III in Business (Administration)
        • BSB30120 Certificate III in Business (Customer Engagement)
        • BSB30120 Certificate III in Business (Medical Administration)
        • BSB30120 Certificate III in Business (Records and Information Management)
      • BSB50820 Diploma of Project Management
    • Cleaning
      • CPP30321 Certificate III in Cleaning Operations
    • Travel
      • SIT30222 Certificate III in Travel
      • SIT40122 Certificate IV in Travel and Tourism
    • Manufacturing
      • MSF30322 Certificate III in Cabinet Making and Timber Technology (Kitchens and Bathrooms)
      • MSF30822 Certificate III in Flooring Technology
        • MSF30822 Certificate III in Flooring Technology (Carpet)
        • MSF30822 Certificate III in Flooring Technology (Resilient)
        • MSF30822 Certificate III in Flooring Technology (Polished concrete)
        • MSF30822 Certificate III in Flooring Technology (Resin)
        • MSF30822 Certificate III in Flooring Technology (Timber)
      • MEM20422 Certificate II in Engineering Pathways
      • MEM31922 Certificate III in Engineering - Fabrication Trade
      • MSM30216 Certificate III in Surface Preparation and Coating Application
      • MSM31022 Certificate III in Recreational Vehicle Service and Repair
      • MSM31122 Certificate III in Recreational Vehicle Manufacturing
      • MSF50222 Diploma of Interior Design
    • Swimming Pools and Spa
      • CPP31218 Certificate III in Swimming Pool and Spa Service
      • CPC40820 Certificate IV in Swimming Pool and Spa Building
    • Marine
      • MEM30719 Certificate III in Marine Craft Construction
      • MSF30322 Certificate III in Cabinet Making and Timber Technology (Marine Cabinetry)
    • Fire
      • CPP20521 Certificate II in Fire Protection Inspection and Testing
      • QBCC Passive Fire (Contractor/Nominee Supervisor)
        • QBCC Install and Maintain – Fire Doors and Fire Shutters
        • QBCC Install and Maintain – Fire Collars, Fire-rated Penetrations and Fire-rated Joint Sealing
        • QBCC Install and Maintain – Fire and Smoke Walls and Fire-rated Ceilings
        • QBCC Install and maintain (all 3)
      • QBCC Passive Fire (Employee/Site Supervisor)
        • QBCC Install and Maintain – Fire Doors and Fire Shutters (Occupational)
        • QBCC Install and Maintain – Fire Collars, Fire-rated Penetrations and Fire-rated Joint Sealing (Occupational)
        • QBCC Install and Maintain – Fire and Smoke Walls and Fire-rated Ceilings (Occupational)
        • QBCC Install and maintain - Occupational (all 3)
      • CPC50520 Diploma of Fire Systems Design
    • Machinery
      • RIIMPO318F - Conduct civil construction skid steer loader operations
      • RIIMPO320F - Conduct civil construction excavator operations
    • Professional Development
      • PD Short Courses
  • State Licencing
  • Contact
  • About
  • Funding
  • Login

MEM31922 Certificate III in Engineering - Fabrication Trade

RPL
$3500
 
If you have skills and knowledge experience in this field, then fast track your qualification with RPL.
 
Enrol Now
 
 
Course
$8500
 
Learn the skills and knowledge required for this qualification, start your course today.
For payment plan, see fees section below.
 
Enrol Now
 

Core Units of Competency

  • MEM13015 Work safely and effectively in manufacturing and engineering
  • MEM16006 Organise and communicate information
  • MEM11011 Undertake manual handling
  • MEM18001 Use hand tools
  • MEM18002 Use power tools/hand held operations
  • MEM14006 Plan work activities
  • MSMENV272 Participate in environmentally sustainable work practices
  • MEM09002 Interpret technical drawing
  • MEM12023 Perform engineering measurements
  • MEM12024 Perform computations
  • MEM16008 Interact with computing technology
  • MEM17003 Assist in the provision of on-the-job training

Elective Units of Competency

  • MEM05004 Perform routine oxy fuel gas welding
  • MEM05005 Carry out mechanical cutting
  • MEM05089 Assemble fabricated components
  • MEM05012 Perform routine manual metal arc welding
  • MEM05090 Weld using manual metal arc welding process
  • MEM05091 Weld using gas metal arc welding process
  • MEM05092 Weld using gas tungsten arc welding process
  • MEM05094 Repair, replace and/or modify fabrications
  • MEM05085 Select welding processes
  • MEM05052 Apply safe welding practices
  • MEM05097 Weld using oxy fuel gas welding process
  • MEM08010 Manually finish/polish materials
  • MEM08012 Prepare surfaces by abrasive blasting (basic)
  • MEM08014 Apply protective coatings (basic)
  • MEM11016 Order materials
  • MEM13019 Undertake work health and safety activities in the workplace
  • MSMENV472 Implement and monitor environmentally sustainable work practices
 
 
 
 
 
 
 
Phone: 1300 417 006
Email: admin@nationalskills.com.au
Online: Contact Us 

 

RPL OR COURSE?

RPL

Recognition of Prior Learning (RPL) is a process that can be completed in a short time frame. It's based on skills, knowledge and evidence you have already acquired over the years to meet the requirements for the qualification.

Evidence for RPL may include:

  • Proven work experience
  • Life experiences (including voluntary work and leisure pursuits)
  • Previous study (Qualifications, industry training, professional development programs or units)
  • References from qualified persons

RPL can be conducted via online delivery and through workplace training.

If a student fails to demonstrate competency in some units required to gain the qualification, Gap Training is used to gain competency in those units. It can be customised to suit the individual client needs. Up to 4 units of gap training are included in your RPL Fee. Additional fees apply for further gap training units.

3 months enrolment period to complete RPL.

Course

A Course is a process that can be completed in a longer time frame. It’s designed for those who have little or no previous experience in this field of qualification. The course will help train you to achieve the required skills and knowledge needed to gain this qualification.

Course training requires access to a workplace and tools. Please check the student handbook for the list of resources required for each unit of competency. If you require access to a workplace, you will need to inform National Skills prior to enrolment so we can arrange access to a workplace for you.

This Course can be conducted via online delivery and through workplace training.

24 months enrolment period to complete course.

WHAT WILL I LEARN?

This qualification provides you with the required skills and knowledge to become a Engineering Tradesperson who applys a wide range of fabrication methods such as metal fabrication, structural steel erection, sheetmetal work, welding, blacksmithing and surface finishing.

CAREER OPPORTUNITIES

Occupational titles may include:

  • Fabrication Engineer
  • Engineering Tradesperson
  • Boilermaker
  • Welder
  • Blacksmith
  • Sheetmetal Worker

ENTRY REQUIREMENTS

There are no entry requirements for this qualification.

UNITS OF COMPETENCY

Total number of units = Twenty-Nine (29)

  • Twelve (12) core units
  • Seventeen (17) elective units

Core Units of Competency

  • MEM13015 Work safely and effectively in manufacturing and engineering
  • MEM16006 Organise and communicate information
  • MEM11011 Undertake manual handling
  • MEM18001 Use hand tools
  • MEM18002 Use power tools/hand held operations
  • MEM14006 Plan work activities
  • MSMENV272 Participate in environmentally sustainable work practices
  • MEM09002 Interpret technical drawing
  • MEM12023 Perform engineering measurements
  • MEM12024 Perform computations
  • MEM16008 Interact with computing technology
  • MEM17003 Assist in the provision of on-the-job training

Elective Units of Competency

  • MEM05004 Perform routine oxy fuel gas welding
  • MEM05005 Carry out mechanical cutting
  • MEM05089 Assemble fabricated components
  • MEM05012 Perform routine manual metal arc welding
  • MEM05090 Weld using manual metal arc welding process
  • MEM05091 Weld using gas metal arc welding process
  • MEM05092 Weld using gas tungsten arc welding process
  • MEM05094 Repair, replace and/or modify fabrications
  • MEM05085 Select welding processes
  • MEM05052 Apply safe welding practices
  • MEM05097 Weld using oxy fuel gas welding process
  • MEM08010 Manually finish/polish materials
  • MEM08012 Prepare surfaces by abrasive blasting (basic)
  • MEM08014 Apply protective coatings (basic)
  • MEM11016 Order materials
  • MEM13019 Undertake work health and safety activities in the workplace
  • MSMENV472 Implement and monitor environmentally sustainable work practices

COURSE / QUAL RECOGNITION

MEM31922 Certificate III in Engineering - Fabrication Trade

This qualification provides a nationally recognised trade outcome for Engineering Tradespersons who apply a wide range of fabrication work including undertaking metal fabrication, structural steel erection, sheetmetal work, welding, blacksmithing and surface finishing.

Licensing Requirements:

There are no specific licences that relate to this qualification. However, depending on the State or Territory, licensing or regulatory requirements may apply to the use of some units in this qualification.

A licence or registration may require a combination of technical qualification, experience, skills and knowledge prior to application. One step in the process of gaining your licence or registration is to complete training which has been approved by the licencing body in your State or Territory.

State and Territory jurisdictions may have different licensing, legislative, regulatory or certification requirements. Relevant State and Territory regulatory authorities should be consulted to confirm those requirements.

FEES

RPL - $3500

  • $1500 on enrolment and $2000 upon completion
  • Students have 3 months to provide their evidence.
  • 4 Gap Training units are included at no extra charge (if required).
  • Additional Gap Training units are available for $250 each.

Course - $8500

Full upfront payment gives you access to our online training platform and all course material for 24 months. Further time extension can be requested at a cost of $180 per month.

Course Payment Plan - $8700

To make course payments more manageable, we offer a payment plan. This allows you to pay in instalments as you progress through the 12 modules of the course over 24 months. Further time extension can be requested at a cost of $180 per month.

Here’s how it works:

  1. Initial Payment: Start with an upfront payment of $1500 at the time of enrolment to secure your online training module to begin the course.
  2. Subsequent Payments: The remaining balance will be divided into instalments, which are due at the start of each new module thereafter.
  3. Total Balance: The price of the course payment plan is $8700 and will be paid in full by the time you reach the final module.

This structure allows you to pay as you learn and ensures you can continue progressing without requiring full payment upfront.

Your cart

Your shopping cart is empty.

Contact

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

National Skills Pty Ltd T/A National Skills

  • Projects
  • RTO Code 45438
  • ABN 65 625 313 199
  • Student Handbook
  • Refund Policy
  • Complaints and Appeals Policy
  • Privacy Policy

Contact us

admin@nationalskills.com.au
Phone 1300 417 006
Suite 245 4/16-18 Beenleigh-Redland Bay Rd
Loganholme QLD 4129
Australia
Suite 245 4/16-18 Beenleigh-Redland Bay Rd, Loganholme QLD 4129, Australia
Copyright © 2025 National Skills